|
|
MSG-2050 is a signal generator designed for generating the simulation signal of GPS (Global Positioning System) satellite.

FEATURES |
■ |
Frequency stability of internal reference oscillator is less then 5×10-7 |
■ |
Rapid changing output level and the level range is from -80dBm to -140dBm |
■ |
Doppler shift function is not built-in |
■ |
The output terminal is DC-cut to able to connect to the powered antenna cable. |
■ |
All NAVI data preset by GP-IB line and also RS-232C. |
■ |
An automatic Z count increment function is equipped so as to synchronize with real time clock. |
■ |
The front panel operation can be programmed by GP-IB and RS-232C. |
* |
The application program is attached. |
|
----------------------------------------------------------------------------------------------------------------------------------------- |
SPECIFICATIONS |
Frequency Characteristics |
Frequency |
1.57542GHz |
Indication |
VFD display |
Accuracy |
5×10-7 |
|
Output Characteristics |
Output range |
-80dBm to -140dBm in 1dB step |
Indication |
VFD display |
Accuracy |
±1.0 dB for -80dBm to -140dBm |
Output impedance |
50Ω, VSWR less than 1.2 |
Spurious output |
Less then -40dB at second harmonic |
Setting |
Can be set with shuttle knob, GP-IB, RS-232C |
|
Modulation |
Modulation method |
BPSK direct sequence spread spectrum modulation |
Indication |
VFD display |
Modulation code |
37 C/A codes |
Channel |
SV1 to SV37 |
Modulation frequency |
1.023MHz clock |
Data modulation |
C/A code synchronized divider, 50bps BPSK |
NAVI data |
50bps test pattern |
Setting |
Can be set with shuttle knob, GP-IB, RS-232C |
Z count |
Automatic increment function is equipped so as to synchronize with real time clock. |
|
Interface Function |
Parallel interface |
GP-IB (Complying with IEEE standard 488-1975) |
Serial interface |
RS-232C |
|
General Data |
Operating temperature range |
+10ºC to +40ºC |
Power requirement |
AC90V to 240V, 50/60Hz |
Dimensions |
Approx. 240(W) × 100(H) × 350(D)mm |
Weight |
Approx. 3.7kg |
|
|
|
|
|