|
|
PSM1735: 多功能相位增益分析儀
NumetriQ: 10μHz - 35MHz Phase Sensitive Multimeter
PSM1735 NumetriQ is the latest addition to the N4L range of phase sensitive multimeters, providing engineers with an exceptionally versatile measurement instrument.
Utilising an innovative design that incorporates both direct digital analysis and heterodyning techniques, the PSM1735 provides a broad range of measurement functions over a wider frequency range than any other instrument available today.
As with other N4L products, PSM1735 NumetriQ utilises the latest DSP and FPGA technology to optimise the use of its analogue hardware providing speed and measurement flexibility without compromise on the performance of each measurement function. |

PSM1735 Phase Sensitive Multimeter |
Versatility without compromise
在世界上各種不同應用領域的工程設計人員對于的測量設備的要求,不外于更快的測量速度、更大的擴充彈性、和更高的測 量精度。N4L 公司推出的新一代多功能測量儀,功能非常全面,應用非常彈性,同時在各種量測功能上也都具備很高的精度 |

PSM1735+Impedance Analysis Interface
and Kelvin Fixture
|
主要功能
一、主要功能 增益和相位的分析 繞 零件的測試 插入式回轉損失,全部諧波失真比率 復合式阻抗及L.C.R分析 寬頻的電力分析 快速雙頻道寬頻電壓表(示波器)2MHz 可選擇式的位準表 可量相位角度 電壓和電流的波形顯示
二、顯示部分 振幅、相位、掃描響應或量測數據的列出 可將大型結果、顯示幕放大
三、特性 可隔離及浮接輸入直流2MHz(頻率)有示波器的功能 可自動將雜訊和諧波排除掉 可做為信號發生器 正弦波10mHz~1MHz 方波、三角波、鋸齒波 10mHz~1MHz 輸出電壓±10mV to ±10V 量測均可加上警鈴的功能 具有RS-232介面可連接至PC 具有PRINTER PORT列印介面,可直接列印:HP、EPSON、CANON
四、應用范圍 可做為閉路回路回授系統的測試 繞 式零件及變壓器的測試 可測試ISDN、ADSL、HDSL等變壓器 可做復合式的阻抗良測 可做為電力及信號失真的分析 可做為電力線負載信號的量測 可做為化學阻抗的規劃分析 可做為非線性系統的特性分析. |

A range of accessories are available |
Features |
Downloads |
- 電源供應器增益裕量與相位裕量分析 |
- 濾波器設計與特性量測 |
- 揚聲器與放大器特性測試 |
- 機械振動特性分析 |
|
|
|
Brochure & Technical Specifications
PDF, 784Kb
Introduction to PSM1700 and PSM1735 Datalog Mode PDF, 1.2Mb |
|
|
|
Compatible accessories... |
Ordering information |
|
- coming soon - |
- PSM1735-USR (without LAN interface)
- PSM1735-USR-L (with LAN interface)
|
|
|
This product is designed, manufactured & supported in the UK. All measurements are traceable to UKAS, certificates of conformance and calibration are supplied as standard. Our products are CE marked. |
|
|